wiki:How to speed up / slow down a video

Speeding up/slowing down video

The speed of a video stream can be changed by changing the presentation timestamp (PTS) of each video frame. This can be done via two methods: using the setpts video filter (which requires re-encoding) or by erasing the timestamps by exporting the video to a raw bitstream format and muxing to a container while creating new timestamps.

Note that in the following examples, the audio stream is not changed, so it should ideally be disabled with -an.

raw bitstream method

This method is lossless and apart from changing the timestamps, copies the video stream as-is. Use this if you require no other changes to your input video.

First, copy the video to a raw bitstream format.

For H.264:

ffmpeg -i input.mp4 -map 0:v -c:v copy -bsf:v h264_mp4toannexb raw.h264

For H.265:

ffmpeg -i input.mp4 -map 0:v -c:v copy -bsf:v hevc_mp4toannexb raw.h265

Then generate new timestamps while muxing to a container:

ffmpeg -fflags +genpts -r 30 -i raw.h264 -c:v copy output.mp4

Change the value of -r to the desired playback frame rate.

setpts filter

To double the speed of the video with the setpts filter, you can use:

ffmpeg -i input.mkv -filter:v "setpts=0.5*PTS" output.mkv

The filter works by changing the presentation timestamp (PTS) of each video frame. For example, if there are two succesive frames shown at timestamps 1 and 2, and you want to speed up the video, those timestamps need to become 0.5 and 1, respectively. Thus, we have to multiply them by 0.5.

Note that this method will drop frames to achieve the desired speed. You can avoid dropped frames by specifying a higher output frame rate than the input. For example, to go from an input of 4 FPS to one that is sped up to 4x that (16 FPS):

ffmpeg -i input.mkv -r 16 -filter:v "setpts=0.25*PTS" output.mkv

To slow down your video, you have to use a multiplier greater than 1:

ffmpeg -i input.mkv -filter:v "setpts=2.0*PTS" output.mkv

Smooth

You can smooth out slow/fast video with the minterpolate video filter. This is also known as "motion interpolation" or "optical flow".

ffmpeg -i input.mkv -filter:v "minterpolate='mi_mode=mci:mc_mode=aobmc:vsbmc=1:fps=120'" output.mkv

Other options include slowmoVideo and Butterflow.

Speeding up/slowing down audio

You can speed up or slow down audio with the atempo audio filter. To double the speed of audio:

ffmpeg -i input.mkv -filter:a "atempo=2.0" -vn output.mkv

The atempo filter is limited to using values between 0.5 and 2.0 (so it can slow it down to no less than half the original speed, and speed up to no more than double the input). If you need to, you can get around this limitation by stringing multiple atempo filters together. The following with quadruple the audio speed:

ffmpeg -i input.mkv -filter:a "atempo=2.0,atempo=2.0" -vn output.mkv

Using a complex filtergraph, you can speed up video and audio at the same time:

ffmpeg -i input.mkv -filter_complex "[0:v]setpts=0.5*PTS[v];[0:a]atempo=2.0[a]" -map "[v]" -map "[a]" output.mkv
Last modified 6 months ago Last modified on Feb 11, 2021, 11:57:01 AM
Note: See TracWiki for help on using the wiki.